dmesg - core 7-4 disabled
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-35-server (buildd@allspice) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #78-Ubuntu SMP Tue Oct 11 16:26:12 UTC 2011 (Ubuntu 2.6.32-35.78-server 2.6.32.46+drm33.20)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000cfe56000 (usable)
BIOS-e820: 00000000cfe56000 - 00000000cfe5e000 (ACPI data)
BIOS-e820: 00000000cfe5e000 - 00000000cfe5f000 (usable)
BIOS-e820: 00000000cfe5f000 - 00000000d0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 00000001affff000 (usable)
DMI 2.4 present.
last_pfn = 0x1affff max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 00D0000000 mask 0FF0000000 uncachable
1 base 00E0000000 mask 0FE0000000 uncachable
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
last_pfn = 0xcfe5f max_arch_pfn = 0x400000000
e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved)
Scanning 1 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000001000 (usable)
modified: 0000000000001000 - 0000000000006000 (reserved)
modified: 0000000000006000 - 000000000009f400 (usable)
modified: 000000000009f400 - 00000000000a0000 (reserved)
modified: 00000000000f0000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 00000000cfe56000 (usable)
modified: 00000000cfe56000 - 00000000cfe5e000 (ACPI data)
modified: 00000000cfe5e000 - 00000000cfe5f000 (usable)
modified: 00000000cfe5f000 - 00000000d0000000 (reserved)
modified: 00000000e0000000 - 00000000f0000000 (reserved)
modified: 00000000fec00000 - 00000000fed00000 (reserved)
modified: 00000000fee00000 - 00000000fee10000 (reserved)
modified: 00000000ffc00000 - 0000000100000000 (reserved)
modified: 0000000100000000 - 00000001affff000 (usable)
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-00000000cfe5f000
NX (Execute Disable) protection: active
0000000000 - 00cfe00000 page 2M
00cfe00000 - 00cfe5f000 page 4k
kernel direct mapping tables up to cfe5f000 @ 8000-e000
init_memory_mapping: 0000000100000000-00000001affff000
NX (Execute Disable) protection: active
0100000000 - 01afe00000 page 2M
01afe00000 - 01affff000 page 4k
kernel direct mapping tables up to 1affff000 @ c000-15000
RAMDISK: 377c8000 - 37fef284
ACPI: RSDP 00000000000f4f00 00024 (v02 HP )
ACPI: XSDT 00000000cfe567c0 00074 (v01 HP ProLiant 00000002 Ò? 0000162E)
ACPI: FACP 00000000cfe56840 000F4 (v03 HP ProLiant 00000002 Ò? 0000162E)
ACPI Warning: Invalid length for Pm1aControlBlock: 32, using default 16 (20090903/tbfadt-607)
ACPI: DSDT 00000000cfe56940 02047 (v01 HP DSDT 00000001 INTL 20030228)
ACPI: FACS 00000000cfe56100 00040
ACPI: SPCR 00000000cfe56140 00050 (v01 HP SPCRRBSU 00000001 Ò? 0000162E)
ACPI: MCFG 00000000cfe561c0 0003C (v01 HP ProLiant 00000001 00000000)
ACPI: HPET 00000000cfe56200 00038 (v01 HP ProLiant 00000002 Ò? 0000162E)
ACPI: SPMI 00000000cfe56240 00040 (v05 HP ProLiant 00000001 Ò? 0000162E)
ACPI: ERST 00000000cfe56280 001D0 (v01 HP ProLiant 00000001 Ò? 0000162E)
ACPI: APIC 00000000cfe56480 0009E (v01 HP ProLiant 00000002 00000000)
ACPI: FFFF 00000000cfe56540 00176 (v01 HP ProLiant 00000001 Ò? 0000162E)
ACPI: BERT 00000000cfe566c0 00030 (v01 HP ProLiant 00000001 Ò? 0000162E)
ACPI: HEST 00000000cfe56700 000BC (v01 HP ProLiant 00000001 Ò? 0000162E)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-00000001affff000
Bootmem setup node 0 0000000000000000-00000001affff000
NODE_DATA [0000000000010000 - 0000000000015fff]
bootmap [0000000000016000 - 000000000004bfff] pages 36
(8 early reservations) ==> bootmem [0000000000 - 01affff000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 0001a84544] TEXT DATA BSS ==> [0001000000 - 0001a84544]
#3 [00377c8000 - 0037fef284] RAMDISK ==> [00377c8000 - 0037fef284]
#4 [000009f400 - 0000100000] BIOS reserved ==> [000009f400 - 0000100000]
#5 [0001a85000 - 0001a85110] BRK ==> [0001a85000 - 0001a85110]
#6 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000]
#7 [000000c000 - 0000010000] PGTABLE ==> [000000c000 - 0000010000]
found SMP MP-table at [ffff8800000f4f80] f4f80
[ffffea0000000000-ffffea0005ffffff] PMD -> [ffff880001c00000-ffff8800071fffff] on node 0
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x001affff
Movable zone start PFN for each node
early_node_map[5] active PFN ranges
0: 0x00000000 -> 0x00000001
0: 0x00000006 -> 0x0000009f
0: 0x00000100 -> 0x000cfe56
0: 0x000cfe5e -> 0x000cfe5f
0: 0x00100000 -> 0x001affff
On node 0 totalpages: 1572336
DMA zone: 56 pages used for memmap
DMA zone: 107 pages reserved
DMA zone: 3831 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 833167 pages, LIFO batch:31
Normal zone: 9856 pages used for memmap
Normal zone: 711039 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x908
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24])
IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 48
PM: Registered nosave memory: 0000000000001000 - 0000000000006000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
PM: Registered nosave memory: 00000000cfe56000 - 00000000cfe5e000
PM: Registered nosave memory: 00000000cfe5f000 - 00000000d0000000
PM: Registered nosave memory: 00000000d0000000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fed00000
PM: Registered nosave memory: 00000000fed00000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee10000
PM: Registered nosave memory: 00000000fee10000 - 00000000ffc00000
PM: Registered nosave memory: 00000000ffc00000 - 0000000100000000
Allocating PCI resources starting at d0000000 (gap: d0000000:10000000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 30 pages/cpu @ffff880007400000 s92376 r8192 d22312 u262144
pcpu-alloc: s92376 r8192 d22312 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1548037
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Initializing CPU#0
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff8800075de000 - ffff88000b5de000
software IO TLB at phys 0x75de000 - 0xb5de000
Memory: 6114800k/7077884k available (5513k kernel code, 788540k absent, 174544k reserved, 3119k data, 812k init)
SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:4352 nr_irqs:880
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 62914560 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2500.515 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5001.03 BogoMIPS (lpj=25005150)
Security Framework initialized
AppArmor: AppArmor initialized
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU 0/0x0 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
Performance Events: Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 22783 entries in 90 pages
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Xeon(R) CPU E5420 @ 2.50GHz stepping 06
Booting processor 1 APIC 0x4 ip 0x6000
Initializing CPU#1
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU 1/0x4 -> Node 0
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0
CPU1: Thermal monitoring enabled (TM2)
CPU1: Intel(R) Xeon(R) CPU E5420 @ 2.50GHz stepping 06
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Booting processor 2 APIC 0x2 ip 0x6000
Initializing CPU#2
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU 2/0x2 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
CPU2: Thermal monitoring enabled (TM2)
CPU2: Intel(R) Xeon(R) CPU E5420 @ 2.50GHz stepping 06
checking TSC synchronization [CPU#0 -> CPU#2]: passed.
Booting processor 3 APIC 0x6 ip 0x6000
Initializing CPU#3
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU 3/0x6 -> Node 0
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 2
CPU3: Thermal monitoring enabled (TM2)
CPU3: Intel(R) Xeon(R) CPU E5420 @ 2.50GHz stepping 06
checking TSC synchronization [CPU#0 -> CPU#3]: passed.
Booting processor 4 APIC 0x1 ip 0x6000
Initializing CPU#4
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU 4/0x1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU4: Thermal monitoring enabled (TM2)
CPU4: Intel(R) Xeon(R) CPU E5420 @ 2.50GHz stepping 06
checking TSC synchronization [CPU#0 -> CPU#4]: passed.
Booting processor 5 APIC 0x5 ip 0x6000
Initializing CPU#5
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU 5/0x5 -> Node 0
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 1
CPU5: Thermal monitoring enabled (TM2)
CPU5: Intel(R) Xeon(R) CPU E5420 @ 2.50GHz stepping 06
checking TSC synchronization [CPU#0 -> CPU#5]: passed.
Booting processor 6 APIC 0x3 ip 0x6000
Initializing CPU#6
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU 6/0x3 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 3
CPU6: Thermal monitoring enabled (TM2)
CPU6: Intel(R) Xeon(R) CPU E5420 @ 2.50GHz stepping 06
checking TSC synchronization [CPU#0 -> CPU#6]: passed.
Booting processor 7 APIC 0x7 ip 0x6000
Initializing CPU#7
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU 7/0x7 -> Node 0
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 3
CPU7: Thermal monitoring enabled (TM2)
CPU7: Intel(R) Xeon(R) CPU E5420 @ 2.50GHz stepping 06
checking TSC synchronization [CPU#0 -> CPU#7]: passed.
Brought up 8 CPUs
Total of 8 processors activated (40002.67 BogoMIPS).
CPU0 attaching sched-domain:
domain 0: span 0,4 level MC
groups: 0 4
domain 1: span 0-7 level CPU
groups: 0,4 (cpu_power = 2048) 1,5 (cpu_power = 2048) 2,6 (cpu_power = 2048) 3,7 (cpu_power = 2048)
CPU1 attaching sched-domain:
domain 0: span 1,5 level MC
groups: 1 5
domain 1: span 0-7 level CPU
groups: 1,5 (cpu_power = 2048) 2,6 (cpu_power = 2048) 3,7 (cpu_power = 2048) 0,4 (cpu_power = 2048)
CPU2 attaching sched-domain:
domain 0: span 2,6 level MC
groups: 2 6
domain 1: span 0-7 level CPU
groups: 2,6 (cpu_power = 2048) 3,7 (cpu_power = 2048) 0,4 (cpu_power = 2048) 1,5 (cpu_power = 2048)
CPU3 attaching sched-domain:
domain 0: span 3,7 level MC
groups: 3 7
domain 1: span 0-7 level CPU
groups: 3,7 (cpu_power = 2048) 0,4 (cpu_power = 2048) 1,5 (cpu_power = 2048) 2,6 (cpu_power = 2048)
CPU4 attaching sched-domain:
domain 0: span 0,4 level MC
groups: 4 0
domain 1: span 0-7 level CPU
groups: 0,4 (cpu_power = 2048) 1,5 (cpu_power = 2048) 2,6 (cpu_power = 2048) 3,7 (cpu_power = 2048)
CPU5 attaching sched-domain:
domain 0: span 1,5 level MC
groups: 5 1
domain 1: span 0-7 level CPU
groups: 1,5 (cpu_power = 2048) 2,6 (cpu_power = 2048) 3,7 (cpu_power = 2048) 0,4 (cpu_power = 2048)
CPU6 attaching sched-domain:
domain 0: span 2,6 level MC
groups: 6 2
domain 1: span 0-7 level CPU
groups: 2,6 (cpu_power = 2048) 3,7 (cpu_power = 2048) 0,4 (cpu_power = 2048) 1,5 (cpu_power = 2048)
CPU7 attaching sched-domain:
domain 0: span 3,7 level MC
groups: 7 3
domain 1: span 0-7 level CPU
groups: 3,7 (cpu_power = 2048) 0,4 (cpu_power = 2048) 1,5 (cpu_power = 2048) 2,6 (cpu_power = 2048)
devtmpfs: initialized
regulator: core version 0.5
Time: 20:40:17 Date: 03/29/12
NET: Registered protocol family 16
ACPI: bus type pci registered
Trying to unpack rootfs image as initramfs...
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG at e0000000 - efffffff
PCI: Using configuration type 1 for base access
PCI: HP ProLiant DL360 detected, enabling pci=bfsort.
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI Error: Field [CDW3] at 96 exceeds Buffer [NULL] size 64 (bits) (20090903/dsopcode-596)
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_._OSC] (Node ffff8801a8c39e20), AE_AML_BUFFER_LIMIT
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:00.0: PME# disabled
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: PME# disabled
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: PME# disabled
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: PME# disabled
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0x1000-0x101f]
pci 0000:00:1d.1: reg 20 io port: [0x1020-0x103f]
pci 0000:00:1d.2: reg 20 io port: [0x1040-0x105f]
pci 0000:00:1d.3: reg 20 io port: [0x1060-0x107f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xf7df0000-0xf7df03ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.1: reg 10 io port: [0x1f0-0x1f7]
pci 0000:00:1f.1: reg 14 io port: [0x3f4-0x3f7]
pci 0000:00:1f.1: reg 18 io port: [0x170-0x177]
pci 0000:00:1f.1: reg 1c io port: [0x374-0x377]
pci 0000:00:1f.1: reg 20 io port: [0x500-0x50f]
pci 0000:09:00.0: PME# supported from D0 D3hot D3cold
pci 0000:09:00.0: PME# disabled
pci 0000:09:00.3: PME# supported from D0 D3hot D3cold
pci 0000:09:00.3: PME# disabled
pci 0000:00:02.0: bridge 32bit mmio: [0xfdf00000-0xfdffffff]
pci 0000:0a:00.0: PME# supported from D0 D3hot D3cold
pci 0000:0a:00.0: PME# disabled
pci 0000:0a:01.0: PME# supported from D0 D3hot D3cold
pci 0000:0a:01.0: PME# disabled
pci 0000:0a:02.0: PME# supported from D0 D3hot D3cold
pci 0000:0a:02.0: PME# disabled
pci 0000:06:00.0: reg 10 64bit mmio: [0xfde00000-0xfdefffff]
pci 0000:06:00.0: reg 18 io port: [0x4000-0x40ff]
pci 0000:06:00.0: reg 1c 64bit mmio: [0xfddf0000-0xfddf0fff]
pci 0000:06:00.0: reg 30 32bit mmio pref: [0x000000-0x03ffff]
pci 0000:06:00.0: supports D1
pci 0000:00:03.0: bridge io port: [0x4000-0x4fff]
pci 0000:00:03.0: bridge 32bit mmio: [0xfdd00000-0xfdefffff]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:06.0: bridge 32bit mmio: [0xf8000000-0xf9ffffff]
pci 0000:03:00.0: reg 10 64bit mmio: [0xf8000000-0xf9ffffff]
pci 0000:03:00.0: reg 30 32bit mmio pref: [0x000000-0x0007ff]
pci 0000:03:00.0: PME# supported from D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:02:00.0: bridge 32bit mmio: [0xf8000000-0xf9ffffff]
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:00:07.0: bridge 32bit mmio: [0xfa000000-0xfbffffff]
pci 0000:05:00.0: reg 10 64bit mmio: [0xfa000000-0xfbffffff]
pci 0000:05:00.0: reg 30 32bit mmio pref: [0x000000-0x0007ff]
pci 0000:05:00.0: PME# supported from D3hot D3cold
pci 0000:05:00.0: PME# disabled
pci 0000:04:00.0: bridge 32bit mmio: [0xfa000000-0xfbffffff]
pci 0000:01:03.0: reg 10 32bit mmio pref: [0xd8000000-0xdfffffff]
pci 0000:01:03.0: reg 14 io port: [0x3000-0x30ff]
pci 0000:01:03.0: reg 18 32bit mmio: [0xf7ff0000-0xf7ffffff]
pci 0000:01:03.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
pci 0000:01:03.0: supports D1 D2
pci 0000:01:04.0: reg 10 io port: [0x2800-0x28ff]
pci 0000:01:04.0: reg 14 32bit mmio: [0xf7fe0000-0xf7fe01ff]
pci 0000:01:04.0: PME# supported from D0 D3hot D3cold
pci 0000:01:04.0: PME# disabled
pci 0000:01:04.2: reg 10 io port: [0x3400-0x34ff]
pci 0000:01:04.2: reg 14 32bit mmio: [0xf7fd0000-0xf7fd07ff]
pci 0000:01:04.2: reg 18 32bit mmio: [0xf7fc0000-0xf7fc1fff]
pci 0000:01:04.2: reg 1c 32bit mmio: [0xf7f00000-0xf7f7ffff]
pci 0000:01:04.2: reg 30 32bit mmio pref: [0x000000-0x00ffff]
pci 0000:01:04.2: PME# supported from D0 D3hot D3cold
pci 0000:01:04.2: PME# disabled
pci 0000:01:04.4: reg 20 io port: [0x3800-0x381f]
pci 0000:01:04.4: PME# supported from D0 D3hot D3cold
pci 0000:01:04.4: PME# disabled
pci 0000:01:04.6: reg 10 32bit mmio: [0xf7ef0000-0xf7ef00ff]
pci 0000:01:04.6: PME# supported from D0 D3hot D3cold
pci 0000:01:04.6: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge io port: [0x2000-0x3fff]
pci 0000:00:1e.0: bridge 32bit mmio: [0xf7e00000-0xf7ffffff]
pci 0000:00:1e.0: bridge 64bit mmio pref: [0xd8000000-0xdfffffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IP2P._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT02._PRT]
ACPI Warning for \_SB_.PCI0.PT02._PRT: Return Package has no elements (empty) (20090903/nspredef-433)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT02.IPE4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT02.IPE4.IPE1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT02.P2P2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT04._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT06.NB01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT07.NB02._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs *5 7 10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *7 10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 *10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *10 11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 5 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs *5 7 10 11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 5 7 *10 11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 5 *7 10 11)
vgaarb: device added: PCI:0000:01:03.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ACPI: WMI: Mapper loaded
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: ioport range 0x408-0x40f has been reserved
system 00:01: ioport range 0x4d0-0x4d1 has been reserved
system 00:01: ioport range 0x700-0x71f has been reserved
system 00:01: ioport range 0x800-0x83f has been reserved
system 00:01: ioport range 0x900-0x97f has been reserved
system 00:01: ioport range 0xc80-0xc83 has been reserved
system 00:01: ioport range 0xcd4-0xcd7 has been reserved
system 00:01: ioport range 0xf50-0xf58 has been reserved
system 00:01: ioport range 0xca0-0xca1 has been reserved
system 00:01: ioport range 0xca4-0xca5 has been reserved
system 00:01: ioport range 0x2f8-0x2ff has been reserved
system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
system 00:01: iomem range 0xfe000000-0xfebfffff has been reserved
pci 0000:0a:00.0: PCI bridge, secondary bus 0000:0b
pci 0000:0a:00.0: IO window: disabled
pci 0000:0a:00.0: MEM window: disabled
pci 0000:0a:00.0: PREFETCH window: disabled
pci 0000:0a:01.0: PCI bridge, secondary bus 0000:0e
pci 0000:0a:01.0: IO window: disabled
pci 0000:0a:01.0: MEM window: disabled
pci 0000:0a:01.0: PREFETCH window: disabled
pci 0000:0a:02.0: PCI bridge, secondary bus 0000:0f
pci 0000:0a:02.0: IO window: disabled
pci 0000:0a:02.0: MEM window: disabled
pci 0000:0a:02.0: PREFETCH window: disabled
pci 0000:09:00.0: PCI bridge, secondary bus 0000:0a
pci 0000:09:00.0: IO window: disabled
pci 0000:09:00.0: MEM window: disabled
pci 0000:09:00.0: PREFETCH window: disabled
pci 0000:09:00.3: PCI bridge, secondary bus 0000:10
pci 0000:09:00.3: IO window: disabled
pci 0000:09:00.3: MEM window: disabled
pci 0000:09:00.3: PREFETCH window: disabled
pci 0000:00:02.0: PCI bridge, secondary bus 0000:09
pci 0000:00:02.0: IO window: disabled
pci 0000:00:02.0: MEM window: 0xfdf00000-0xfdffffff
pci 0000:00:02.0: PREFETCH window: disabled
pci 0000:00:03.0: PCI bridge, secondary bus 0000:06
pci 0000:00:03.0: IO window: 0x4000-0x4fff
pci 0000:00:03.0: MEM window: 0xfdd00000-0xfdefffff
pci 0000:00:03.0: PREFETCH window: 0xd0000000-0xd00fffff
pci 0000:00:04.0: PCI bridge, secondary bus 0000:13
pci 0000:00:04.0: IO window: disabled
pci 0000:00:04.0: MEM window: disabled
pci 0000:00:04.0: PREFETCH window: disabled
pci 0000:00:05.0: PCI bridge, secondary bus 0000:16
pci 0000:00:05.0: IO window: disabled
pci 0000:00:05.0: MEM window: disabled
pci 0000:00:05.0: PREFETCH window: disabled
pci 0000:02:00.0: PCI bridge, secondary bus 0000:03
pci 0000:02:00.0: IO window: disabled
pci 0000:02:00.0: MEM window: 0xf8000000-0xf9ffffff
pci 0000:02:00.0: PREFETCH window: 0xd0100000-0xd01fffff
pci 0000:00:06.0: PCI bridge, secondary bus 0000:02
pci 0000:00:06.0: IO window: disabled
pci 0000:00:06.0: MEM window: 0xf8000000-0xf9ffffff
pci 0000:00:06.0: PREFETCH window: 0xd0100000-0xd01fffff
pci 0000:04:00.0: PCI bridge, secondary bus 0000:05
pci 0000:04:00.0: IO window: disabled
pci 0000:04:00.0: MEM window: 0xfa000000-0xfbffffff
pci 0000:04:00.0: PREFETCH window: 0xd0200000-0xd02fffff
pci 0000:00:07.0: PCI bridge, secondary bus 0000:04
pci 0000:00:07.0: IO window: disabled
pci 0000:00:07.0: MEM window: 0xfa000000-0xfbffffff
pci 0000:00:07.0: PREFETCH window: 0xd0200000-0xd02fffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
pci 0000:00:1e.0: IO window: 0x2000-0x3fff
pci 0000:00:1e.0: MEM window: 0xf7e00000-0xf7ffffff
pci 0000:00:1e.0: PREFETCH window: 0x000000d8000000-0x000000dfffffff
pci 0000:00:02.0: setting latency timer to 64
pci 0000:09:00.0: setting latency timer to 64
alloc irq_desc for 16 on node -1
alloc kstat_irqs on node -1
pci 0000:0a:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:0a:00.0: setting latency timer to 64
alloc irq_desc for 17 on node -1
alloc kstat_irqs on node -1
pci 0000:0a:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:0a:01.0: setting latency timer to 64
alloc irq_desc for 18 on node -1
alloc kstat_irqs on node -1
pci 0000:0a:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:0a:02.0: setting latency timer to 64
pci 0000:09:00.3: setting latency timer to 64
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:04.0: setting latency timer to 64
pci 0000:00:05.0: setting latency timer to 64
pci 0000:00:06.0: setting latency timer to 64
pci 0000:02:00.0: setting latency timer to 64
pci 0000:00:07.0: setting latency timer to 64
pci 0000:04:00.0: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:09: resource 1 mem: [0xfdf00000-0xfdffffff]
pci_bus 0000:06: resource 0 io: [0x4000-0x4fff]
pci_bus 0000:06: resource 1 mem: [0xfdd00000-0xfdefffff]
pci_bus 0000:06: resource 2 pref mem [0xd0000000-0xd00fffff]
pci_bus 0000:02: resource 1 mem: [0xf8000000-0xf9ffffff]
pci_bus 0000:02: resource 2 pref mem [0xd0100000-0xd01fffff]
pci_bus 0000:03: resource 1 mem: [0xf8000000-0xf9ffffff]
pci_bus 0000:03: resource 2 pref mem [0xd0100000-0xd01fffff]
pci_bus 0000:04: resource 1 mem: [0xfa000000-0xfbffffff]
pci_bus 0000:04: resource 2 pref mem [0xd0200000-0xd02fffff]
pci_bus 0000:05: resource 1 mem: [0xfa000000-0xfbffffff]
pci_bus 0000:05: resource 2 pref mem [0xd0200000-0xd02fffff]
pci_bus 0000:01: resource 0 io: [0x2000-0x3fff]
pci_bus 0000:01: resource 1 mem: [0xf7e00000-0xf7ffffff]
pci_bus 0000:01: resource 2 pref mem [0xd8000000-0xdfffffff]
pci_bus 0000:01: resource 3 io: [0x00-0xffff]
pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:00:1f.0: rerouting interrupts for [8086:2670]
pci 0000:01:03.0: Boot video device
platform rtc_cmos: registered platform RTC device (no PNP device found)
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1333053616.450:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.13)
msgmni has been set to 11942
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered (default)
io scheduler cfq registered
alloc irq_desc for 48 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:02.0: irq 48 for MSI/MSI-X
pcieport 0000:00:02.0: setting latency timer to 64
alloc irq_desc for 49 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:03.0: irq 49 for MSI/MSI-X
pcieport 0000:00:03.0: setting latency timer to 64
alloc irq_desc for 50 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:04.0: irq 50 for MSI/MSI-X
pcieport 0000:00:04.0: setting latency timer to 64
alloc irq_desc for 51 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:05.0: irq 51 for MSI/MSI-X
pcieport 0000:00:05.0: setting latency timer to 64
alloc irq_desc for 52 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:06.0: irq 52 for MSI/MSI-X
pcieport 0000:00:06.0: setting latency timer to 64
alloc irq_desc for 53 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:07.0: irq 53 for MSI/MSI-X
pcieport 0000:00:07.0: setting latency timer to 64
alloc irq_desc for 54 on node -1
alloc kstat_irqs on node -1
pcieport 0000:0a:00.0: irq 54 for MSI/MSI-X
pcieport 0000:0a:00.0: setting latency timer to 64
alloc irq_desc for 55 on node -1
alloc kstat_irqs on node -1
pcieport 0000:0a:01.0: irq 55 for MSI/MSI-X
pcieport 0000:0a:01.0: setting latency timer to 64
alloc irq_desc for 56 on node -1
alloc kstat_irqs on node -1
pcieport 0000:0a:02.0: irq 56 for MSI/MSI-X
pcieport 0000:0a:02.0: setting latency timer to 64
aer 0000:00:02.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:00:03.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:00:04.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:00:05.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:00:06.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:00:07.0:pcie02: AER service couldn't init device: no _OSC support
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
processor LNXCPU:00: registered as cooling_device0
processor LNXCPU:01: registered as cooling_device1
processor LNXCPU:02: registered as cooling_device2
processor LNXCPU:03: registered as cooling_device3
processor LNXCPU:04: registered as cooling_device4
processor LNXCPU:05: registered as cooling_device5
processor LNXCPU:06: registered as cooling_device6
processor LNXCPU:07: registered as cooling_device7
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (8 C)
Linux agpgart interface v0.103
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input1
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x500 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x508 irq 15
Fixed MDIO Bus: probed
PPP generic driver version 2.4.2
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 16, io mem 0xf7df0000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001020
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001040
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
alloc irq_desc for 19 on node -1
alloc kstat_irqs on node -1
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001060
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
alloc irq_desc for 22 on node -1
alloc kstat_irqs on node -1
uhci_hcd 0000:01:04.4: PCI INT B -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:01:04.4: UHCI Host Controller
uhci_hcd 0000:01:04.4: new USB bus registered, assigned bus number 6
uhci_hcd 0000:01:04.4: port count misdetected? forcing to 2 ports
uhci_hcd 0000:01:04.4: irq 22, io base 0x00003800
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos rtc_cmos: RTC can wake from S4
rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
device-mapper: multipath: version 1.1.0 loaded
device-mapper: multipath round-robin: version 1.0.0 loaded
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
PM: Resume from disk failed.
registered taskstats version 1
Magic number: 4:416:701
rtc_cmos rtc_cmos: setting system clock to 2012-03-29 20:40:17 UTC (1333053617)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing initrd memory: 8348k freed
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
ata1.00: ATAPI: HL-DT-STDVD-ROM GDR-D10N, 3.00, max UDMA/33
ata1.00: configured for UDMA/33
scsi 0:0:0:0: CD-ROM HL-DT-ST DVD-ROM GDR-D10N 3.00 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sr 0:0:0:0: Attached scsi generic sg0 type 5
Freeing unused kernel memory: 812k freed
Write protecting the kernel read-only data: 7808k
udev: starting version 151
md: linear personality registered for level -1
md: multipath personality registered for level -4
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
HP CISS Driver (v 3.6.20)
cciss 0000:06:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
alloc irq_desc for 57 on node -1
alloc kstat_irqs on node -1
cciss 0000:06:00.0: irq 57 for MSI/MSI-X
alloc irq_desc for 58 on node -1
alloc kstat_irqs on node -1
cciss 0000:06:00.0: irq 58 for MSI/MSI-X
alloc irq_desc for 59 on node -1
alloc kstat_irqs on node -1
cciss 0000:06:00.0: irq 59 for MSI/MSI-X
alloc irq_desc for 60 on node -1
alloc kstat_irqs on node -1
cciss 0000:06:00.0: irq 60 for MSI/MSI-X
async_tx: api initialized (async)
usb 6-1: new full speed USB device using uhci_hcd and address 2
IRQ 59/cciss0: IRQF_DISABLED is not guaranteed on shared IRQs
cciss0: at PCI 0000:06:00.0 IRQ 59 using DAC
cciss/c0d0: p1 p2 p3 < p5 >
raid6: int64x1 1666 MB/s
usb 6-1: configuration #1 chosen from 1 choice
usbcore: registered new interface driver hiddev
input: HP Virtual Keyboard as /devices/pci0000:00/0000:00:1e.0/0000:01:04.4/usb6/6-1/6-1:1.0/input/input3
generic-usb 0003:03F0:1027.0001: input,hidraw0: USB HID v1.01 Keyboard [HP Virtual Keyboard] on usb-0000:01:04.4-1/input0
input: HP Virtual Keyboard as /devices/pci0000:00/0000:00:1e.0/0000:01:04.4/usb6/6-1/6-1:1.1/input/input4
generic-usb 0003:03F0:1027.0002: input,hidraw1: USB HID v1.01 Mouse [HP Virtual Keyboard] on usb-0000:01:04.4-1/input1
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
raid6: int64x2 2608 MB/s
usb 6-2: new full speed USB device using uhci_hcd and address 3
raid6: int64x4 2022 MB/s
usb 6-2: configuration #1 chosen from 1 choice
hub 6-2:1.0: USB hub found
hub 6-2:1.0: 7 ports detected
raid6: int64x8 1636 MB/s
raid6: sse2x1 3278 MB/s
raid6: sse2x2 6346 MB/s
raid6: sse2x4 7147 MB/s
raid6: using algorithm sse2x4 (7147 MB/s)
xor: automatically using best checksumming function: generic_sse
generic_sse: 9282.400 MB/sec
xor: using function: generic_sse (9282.400 MB/sec)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: raid10 personality registered for level 10
EXT4-fs (cciss!c0d0p2): mounted filesystem with ordered data mode
Adding 7811064k swap on /dev/cciss/c0d0p1. Priority:-1 extents:1 across:7811064k
udev: starting version 151
lp: driver loaded but no devices found
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
EDAC MC: Ver: 2.1.0 Oct 11 2011
Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.0.2 (Aug 21, 2009)
bnx2 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
EDAC MC0: Giving out device to 'i5000_edac.c' 'I5000': DEV 0000:00:10.0
EDAC PCI0: Giving out device to module 'i5000_edac' controller 'EDAC PCI controller': DEV '0000:00:10.0' (POLLED)
hpilo 0000:01:04.2: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[drm] Initialized drm 1.1.0 20060810
intel_rng: FWH not detected
ipmi message handler version 39.2
IPMI System Interface driver.
ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca2, slave address 0x20, irq 0
[drm] radeon disabling kernel modesetting for known bad device.
alloc irq_desc for 23 on node -1
alloc kstat_irqs on node -1
pci 0000:01:03.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[drm] Initialized radeon 1.32.0 20080528 for 0000:01:03.0 on minor 0
vga16fb: initializing
vga16fb: mapped to 0xffff8800000a0000
fb0: VGA16 VGA frame buffer device
type=1505 audit(1333053624.927:2): operation="profile_load" pid=680 name="/sbin/dhclient3"
type=1505 audit(1333053624.927:3): operation="profile_load" pid=680 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
type=1505 audit(1333053624.927:4): operation="profile_load" pid=680 name="/usr/lib/connman/scripts/dhclient-script"
Console: switching to colour frame buffer device 80x30
------------[ cut here ]------------
WARNING: at /build/buildd/linux-2.6.32/arch/x86/kernel/cpu/mtrr/generic.c:467 generic_get_mtrr+0x11e/0x140()
Hardware name: ProLiant DL360 G5
mtrr: your BIOS has set up an incorrect mask, fixing it up.
Modules linked in: i7300_idle(-) fbcon tileblit font bitblit softcursor vga16fb vgastate radeon ttm drm_kms_helper ipmi_si(+) ipmi_msghandler drm i2c_algo_bit hpilo i5000_edac psmouse serio_raw bnx2(+) edac_core i5k_amb shpchp lp parport raid10 raid456 async_pq async_xor xor async_memcpy async_raid6_recov usbhid hid raid6_pq async_tx cciss raid1 raid0 multipath linear
Pid: 380, comm: plymouthd Not tainted 2.6.32-35-server #78-Ubuntu
Call Trace:
[] warn_slowpath_common+0x7b/0xc0
[] warn_slowpath_fmt+0x41/0x50
[] generic_get_mtrr+0x11e/0x140
[] mtrr_add_page+0xdb/0x3f0
[] ? drm_ht_just_insert_please+0xa2/0xf0 [drm]
[] mtrr_add+0x56/0x70
[] drm_addmap_core+0x659/0x800 [drm]
[] drm_addmap+0x1a/0x30 [drm]
[] radeon_driver_firstopen+0x5d/0x70 [radeon]
[] drm_setup+0x23/0x1a0 [drm]
[] drm_open+0x10a/0x130 [drm]
[] drm_stub_open+0x133/0x260 [drm]
[] chrdev_open+0x13a/0x240
[] ? chrdev_open+0x0/0x240
[] __dentry_open+0x113/0x370
[] ? security_inode_permission+0x1f/0x30
[] ? inode_permission+0xaf/0xd0
[] nameidata_to_filp+0x57/0x70
[] do_filp_open+0x2da/0xba0
[] ? alloc_fd+0x10a/0x150
[] do_sys_open+0x69/0x170
[] sys_open+0x20/0x30
[] system_call_fastpath+0x16/0x1b
---[ end trace 12604a38f5063eba ]---
EXT4-fs (cciss!c0d0p5): mounted filesystem with ordered data mode
ipmi: Found new BMC (man_id: 0x00000b, prod_id: 0x0000, dev_id: 0x11)
IPMI kcs interface initialized
ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
ipmi_si: duplicate interface
alloc irq_desc for 21 on node -1
alloc kstat_irqs on node -1
ipmi_si 0000:01:04.6: PCI INT A -> GSI 21 (level, low) -> IRQ 21
ipmi_si: Trying PCI-specified kcs state machine at mem address 0xf7ef0000, slave address 0x0, irq 21
type=1505 audit(1333053625.307:5): operation="profile_load" pid=873 name="/usr/sbin/tcpdump"
type=1505 audit(1333053625.307:6): operation="profile_replace" pid=870 name="/sbin/dhclient3"
type=1505 audit(1333053625.307:7): operation="profile_replace" pid=870 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
type=1505 audit(1333053625.307:8): operation="profile_replace" pid=870 name="/usr/lib/connman/scripts/dhclient-script"
type=1505 audit(1333053625.307:9): operation="profile_load" pid=871 name="/usr/bin/evince"
type=1505 audit(1333053625.317:10): operation="profile_load" pid=871 name="/usr/bin/evince-previewer"
type=1505 audit(1333053625.327:11): operation="profile_load" pid=871 name="/usr/bin/evince-thumbnailer"
bnx2 0000:03:00.0: firmware: requesting bnx2/bnx2-mips-06-5.0.0.j3.fw
bnx2 0000:03:00.0: firmware: requesting bnx2/bnx2-rv2p-06-5.0.0.j3.fw
eth0: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem f8000000, IRQ 18, node addr 00:1f:29:69:b6:1c
bnx2 0000:05:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
IRQ 21/ipmi_si: IRQF_DISABLED is not guaranteed on shared IRQs
Using irq 21
input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input5
ipmi: interfacing existing BMC (man_id: 0x00000b, prod_id: 0x0000, dev_id: 0x11)
IPMI kcs interface initialized
bnx2 0000:05:00.0: firmware: requesting bnx2/bnx2-mips-06-5.0.0.j3.fw
bnx2 0000:05:00.0: firmware: requesting bnx2/bnx2-rv2p-06-5.0.0.j3.fw
eth1: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem fa000000, IRQ 19, node addr 00:1f:29:69:a6:bc
alloc irq_desc for 61 on node -1
alloc kstat_irqs on node -1
bnx2 0000:05:00.0: irq 61 for MSI/MSI-X
bnx2: eth1: using MSI
ADDRCONF(NETDEV_UP): eth1: link is not ready
bnx2: eth1 NIC Copper Link is Up, 1000 Mbps full duplex
ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
JBD: barrier-based sync failed on cciss!c0d0p2-8 - disabling barriers
CPU0 attaching NULL sched-domain.
CPU1 attaching NULL sched-domain.
CPU2 attaching NULL sched-domain.
CPU3 attaching NULL sched-domain.
CPU4 attaching NULL sched-domain.
CPU5 attaching NULL sched-domain.
CPU6 attaching NULL sched-domain.
CPU7 attaching NULL sched-domain.
CPU0 attaching sched-domain:
domain 0: span 0,4 level MC
groups: 0 4
domain 1: span 0-7 level CPU
groups: 0,4 (cpu_power = 2048) 1,5 (cpu_power = 2048) 2,6 (cpu_power = 2048) 3,7 (cpu_power = 2048)
CPU1 attaching sched-domain:
domain 0: span 1,5 level MC
groups: 1 5
domain 1: span 0-7 level CPU
groups: 1,5 (cpu_power = 2048) 2,6 (cpu_power = 2048) 3,7 (cpu_power = 2048) 0,4 (cpu_power = 2048)
CPU2 attaching sched-domain:
domain 0: span 2,6 level MC
groups: 2 6
domain 1: span 0-7 level CPU
groups: 2,6 (cpu_power = 2048) 3,7 (cpu_power = 2048) 0,4 (cpu_power = 2048) 1,5 (cpu_power = 2048)
CPU3 attaching sched-domain:
domain 0: span 3,7 level MC
groups: 3 7
domain 1: span 0-7 level CPU
groups: 3,7 (cpu_power = 2048) 0,4 (cpu_power = 2048) 1,5 (cpu_power = 2048) 2,6 (cpu_power = 2048)
CPU4 attaching sched-domain:
domain 0: span 0,4 level MC
groups: 4 0
domain 1: span 0-7 level CPU
groups: 0,4 (cpu_power = 2048) 1,5 (cpu_power = 2048) 2,6 (cpu_power = 2048) 3,7 (cpu_power = 2048)
CPU5 attaching sched-domain:
domain 0: span 1,5 level MC
groups: 5 1
domain 1: span 0-7 level CPU
groups: 1,5 (cpu_power = 2048) 2,6 (cpu_power = 2048) 3,7 (cpu_power = 2048) 0,4 (cpu_power = 2048)
CPU6 attaching sched-domain:
domain 0: span 2,6 level MC
groups: 6 2
domain 1: span 0-7 level CPU
groups: 2,6 (cpu_power = 2048) 3,7 (cpu_power = 2048) 0,4 (cpu_power = 2048) 1,5 (cpu_power = 2048)
CPU7 attaching sched-domain:
domain 0: span 3,7 level MC
groups: 7 3
domain 1: span 0-7 level CPU
groups: 3,7 (cpu_power = 2048) 0,4 (cpu_power = 2048) 1,5 (cpu_power = 2048) 2,6 (cpu_power = 2048)
usb 3-2: new low speed USB device using uhci_hcd and address 2
usb 3-2: configuration #1 chosen from 1 choice
input: Lenovo Optical USB Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input6
generic-usb 0003:17EF:6019.0003: input,hidraw2: USB HID v1.11 Mouse [Lenovo Optical USB Mouse] on usb-0000:00:1d.1-2/input0
CPU0 attaching NULL sched-domain.
CPU1 attaching NULL sched-domain.
CPU2 attaching NULL sched-domain.
CPU3 attaching NULL sched-domain.
CPU4 attaching NULL sched-domain.
CPU5 attaching NULL sched-domain.
CPU6 attaching NULL sched-domain.
CPU7 attaching NULL sched-domain.
CPU0 attaching sched-domain:
domain 0: span 0,4 level MC
groups: 0 4
domain 1: span 0,2-7 level CPU
groups: 0,4 (cpu_power = 2048) 2,6 (cpu_power = 2048) 3,7 (cpu_power = 2048) 5
CPU2 attaching sched-domain:
domain 0: span 2,6 level MC
groups: 2 6
domain 1: span 0,2-7 level CPU
groups: 2,6 (cpu_power = 2048) 3,7 (cpu_power = 2048) 5 0,4 (cpu_power = 2048)
CPU3 attaching sched-domain:
domain 0: span 3,7 level MC
groups: 3 7
domain 1: span 0,2-7 level CPU
groups: 3,7 (cpu_power = 2048) 5 0,4 (cpu_power = 2048) 2,6 (cpu_power = 2048)
CPU4 attaching sched-domain:
domain 0: span 0,4 level MC
groups: 4 0
domain 1: span 0,2-7 level CPU
groups: 0,4 (cpu_power = 2048) 2,6 (cpu_power = 2048) 3,7 (cpu_power = 2048) 5
CPU5 attaching sched-domain:
domain 0: span 0,2-7 level CPU
groups: 5 0,4 (cpu_power = 2048) 2,6 (cpu_power = 2048) 3,7 (cpu_power = 2048)
CPU6 attaching sched-domain:
domain 0: span 2,6 level MC
groups: 6 2
domain 1: span 0,2-7 level CPU
groups: 2,6 (cpu_power = 2048) 3,7 (cpu_power = 2048) 5 0,4 (cpu_power = 2048)
CPU7 attaching sched-domain:
domain 0: span 3,7 level MC
groups: 7 3
domain 1: span 0,2-7 level CPU
groups: 3,7 (cpu_power = 2048) 5 0,4 (cpu_power = 2048) 2,6 (cpu_power = 2048)
CPU 1 is now offline
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
JBD: barrier-based sync failed on cciss!c0d0p5-8 - disabling barriers
CPU0 attaching NULL sched-domain.
CPU2 attaching NULL sched-domain.
CPU3 attaching NULL sched-domain.
CPU4 attaching NULL sched-domain.
CPU5 attaching NULL sched-domain.
CPU6 attaching NULL sched-domain.
CPU7 attaching NULL sched-domain.
CPU0 attaching sched-domain:
domain 0: span 0,4 level MC
groups: 0 4
domain 1: span 0,3-7 level CPU
groups: 0,4 (cpu_power = 2048) 3,7 (cpu_power = 2048) 5 6
CPU3 attaching sched-domain:
domain 0: span 3,7 level MC
groups: 3 7
domain 1: span 0,3-7 level CPU
groups: 3,7 (cpu_power = 2048) 5 6 0,4 (cpu_power = 2048)
CPU4 attaching sched-domain:
domain 0: span 0,4 level MC
groups: 4 0
domain 1: span 0,3-7 level CPU
groups: 0,4 (cpu_power = 2048) 3,7 (cpu_power = 2048) 5 6
CPU5 attaching sched-domain:
domain 0: span 0,3-7 level CPU
groups: 5 6 0,4 (cpu_power = 2048) 3,7 (cpu_power = 2048)
CPU6 attaching sched-domain:
domain 0: span 0,3-7 level CPU
groups: 6 0,4 (cpu_power = 2048) 3,7 (cpu_power = 2048) 5
CPU7 attaching sched-domain:
domain 0: span 3,7 level MC
groups: 7 3
domain 1: span 0,3-7 level CPU
groups: 3,7 (cpu_power = 2048) 5 6 0,4 (cpu_power = 2048)
CPU 2 is now offline
CPU0 attaching NULL sched-domain.
CPU3 attaching NULL sched-domain.
CPU4 attaching NULL sched-domain.
CPU5 attaching NULL sched-domain.
CPU6 attaching NULL sched-domain.
CPU7 attaching NULL sched-domain.
CPU0 attaching sched-domain:
domain 0: span 0,4 level MC
groups: 0 4
domain 1: span 0,4-7 level CPU
groups: 0,4 (cpu_power = 2048) 5 6 7
CPU4 attaching sched-domain:
domain 0: span 0,4 level MC
groups: 4 0
domain 1: span 0,4-7 level CPU
groups: 0,4 (cpu_power = 2048) 5 6 7
CPU5 attaching sched-domain:
domain 0: span 0,4-7 level CPU
groups: 5 6 7 0,4 (cpu_power = 2048)
CPU6 attaching sched-domain:
domain 0: span 0,4-7 level CPU
groups: 6 7 0,4 (cpu_power = 2048) 5
CPU7 attaching sched-domain:
domain 0: span 0,4-7 level CPU
groups: 7 0,4 (cpu_power = 2048) 5 6
CPU 3 is now offline
Booting processor 3 APIC 0x6 ip 0x6000
Initializing CPU#3
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU 3/0x6 -> Node 0
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 2
CPU3: Thermal monitoring enabled (TM2)
CPU3: Intel(R) Xeon(R) CPU E5420 @ 2.50GHz stepping 06
checking TSC synchronization [CPU#4 -> CPU#3]: passed.
CPU0 attaching NULL sched-domain.
CPU4 attaching NULL sched-domain.
CPU5 attaching NULL sched-domain.
CPU6 attaching NULL sched-domain.
CPU7 attaching NULL sched-domain.
CPU0 attaching sched-domain:
domain 0: span 0,4 level MC
groups: 0 4
domain 1: span 0,3-7 level CPU
groups: 0,4 (cpu_power = 2048) 3,7 (cpu_power = 2048) 5 6
CPU3 attaching sched-domain:
domain 0: span 3,7 level MC
groups: 3 7
domain 1: span 0,3-7 level CPU
groups: 3,7 (cpu_power = 2048) 5 6 0,4 (cpu_power = 2048)
CPU4 attaching sched-domain:
domain 0: span 0,4 level MC
groups: 4 0
domain 1: span 0,3-7 level CPU
groups: 0,4 (cpu_power = 2048) 3,7 (cpu_power = 2048) 5 6
CPU5 attaching sched-domain:
domain 0: span 0,3-7 level CPU
groups: 5 6 0,4 (cpu_power = 2048) 3,7 (cpu_power = 2048)
CPU6 attaching sched-domain:
domain 0: span 0,3-7 level CPU
groups: 6 0,4 (cpu_power = 2048) 3,7 (cpu_power = 2048) 5
CPU7 attaching sched-domain:
domain 0: span 3,7 level MC
groups: 7 3
domain 1: span 0,3-7 level CPU
groups: 3,7 (cpu_power = 2048) 5 6 0,4 (cpu_power = 2048)
CPU0 attaching NULL sched-domain.
CPU3 attaching NULL sched-domain.
CPU4 attaching NULL sched-domain.
CPU5 attaching NULL sched-domain.
CPU6 attaching NULL sched-domain.
CPU7 attaching NULL sched-domain.
CPU0 attaching sched-domain:
domain 0: span 0,4 level MC
groups: 0 4
domain 1: span 0,4-7 level CPU
groups: 0,4 (cpu_power = 2048) 5 6 7
CPU4 attaching sched-domain:
domain 0: span 0,4 level MC
groups: 4 0
domain 1: span 0,4-7 level CPU
groups: 0,4 (cpu_power = 2048) 5 6 7
CPU5 attaching sched-domain:
domain 0: span 0,4-7 level CPU
groups: 5 6 7 0,4 (cpu_power = 2048)
CPU6 attaching sched-domain:
domain 0: span 0,4-7 level CPU
groups: 6 7 0,4 (cpu_power = 2048) 5
CPU7 attaching sched-domain:
domain 0: span 0,4-7 level CPU
groups: 7 0,4 (cpu_power = 2048) 5 6
CPU 3 is now offline
CPU0 attaching NULL sched-domain.
CPU4 attaching NULL sched-domain.
CPU5 attaching NULL sched-domain.
CPU6 attaching NULL sched-domain.
CPU7 attaching NULL sched-domain.
CPU0 attaching sched-domain:
domain 0: span 0,5-7 level CPU
groups: 0 5 6 7
CPU5 attaching sched-domain:
domain 0: span 0,5-7 level CPU
groups: 5 6 7 0
CPU6 attaching sched-domain:
domain 0: span 0,5-7 level CPU
groups: 6 7 0 5
CPU7 attaching sched-domain:
domain 0: span 0,5-7 level CPU
groups: 7 0 5 6
Broke affinity for irq 61
CPU 4 is now offline
CPU0 attaching NULL sched-domain.
CPU5 attaching NULL sched-domain.
CPU6 attaching NULL sched-domain.
CPU7 attaching NULL sched-domain.
CPU0 attaching sched-domain:
domain 0: span 0,6-7 level CPU
groups: 0 6 7
CPU6 attaching sched-domain:
domain 0: span 0,6-7 level CPU
groups: 6 7 0
CPU7 attaching sched-domain:
domain 0: span 0,6-7 level CPU
groups: 7 0 6
CPU 5 is now offline
CPU0 attaching NULL sched-domain.
CPU6 attaching NULL sched-domain.
CPU7 attaching NULL sched-domain.
CPU0 attaching sched-domain:
domain 0: span 0,7 level CPU
groups: 0 7
CPU7 attaching sched-domain:
domain 0: span 0,7 level CPU
groups: 7 0
Broke affinity for irq 17
Broke affinity for irq 21
CPU 6 is now offline
CPU0 attaching NULL sched-domain.
CPU7 attaching NULL sched-domain.
CPU0 attaching NULL sched-domain.
CPU 7 is now offline
SMP alternatives: switching to UP code
SMP alternatives: switching to SMP code
Booting processor 7 APIC 0x7 ip 0x6000
Initializing CPU#7
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU 7/0x7 -> Node 0
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 3
CPU7: Thermal monitoring enabled (TM2)
CPU7: Intel(R) Xeon(R) CPU E5420 @ 2.50GHz stepping 06
checking TSC synchronization [CPU#0 -> CPU#7]: passed.
CPU0 attaching NULL sched-domain.
CPU0 attaching sched-domain:
domain 0: span 0,7 level CPU
groups: 0 7
CPU7 attaching sched-domain:
domain 0: span 0,7 level CPU
groups: 7 0
Booting processor 6 APIC 0x3 ip 0x6000
Initializing CPU#6
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU 6/0x3 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 3
CPU6: Thermal monitoring enabled (TM2)
CPU6: Intel(R) Xeon(R) CPU E5420 @ 2.50GHz stepping 06
checking TSC synchronization [CPU#7 -> CPU#6]: passed.
CPU0 attaching NULL sched-domain.
CPU7 attaching NULL sched-domain.
CPU0 attaching sched-domain:
domain 0: span 0,6-7 level CPU
groups: 0 6 7
CPU6 attaching sched-domain:
domain 0: span 0,6-7 level CPU
groups: 6 7 0
CPU7 attaching sched-domain:
domain 0: span 0,6-7 level CPU
groups: 7 0 6
CPU0 attaching NULL sched-domain.
CPU6 attaching NULL sched-domain.
CPU7 attaching NULL sched-domain.
CPU0 attaching sched-domain:
domain 0: span 0,7 level CPU
groups: 0 7
CPU7 attaching sched-domain:
domain 0: span 0,7 level CPU
groups: 7 0
Broke affinity for irq 17
Broke affinity for irq 21
CPU 6 is now offline
Booting processor 6 APIC 0x3 ip 0x6000
Initializing CPU#6
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU 6/0x3 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 3
CPU6: Thermal monitoring enabled (TM2)
CPU6: Intel(R) Xeon(R) CPU E5420 @ 2.50GHz stepping 06
checking TSC synchronization [CPU#7 -> CPU#6]: passed.
CPU0 attaching NULL sched-domain.
CPU7 attaching NULL sched-domain.
CPU0 attaching sched-domain:
domain 0: span 0,6-7 level CPU
groups: 0 6 7
CPU6 attaching sched-domain:
domain 0: span 0,6-7 level CPU
groups: 6 7 0
CPU7 attaching sched-domain:
domain 0: span 0,6-7 level CPU
groups: 7 0 6
Booting processor 1 APIC 0x4 ip 0x6000
Initializing CPU#1
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU 1/0x4 -> Node 0
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0
CPU1: Thermal monitoring enabled (TM2)
CPU1: Intel(R) Xeon(R) CPU E5420 @ 2.50GHz stepping 06
checking TSC synchronization [CPU#7 -> CPU#1]: passed.
CPU0 attaching NULL sched-domain.
CPU6 attaching NULL sched-domain.
CPU7 attaching NULL sched-domain.
CPU0 attaching sched-domain:
domain 0: span 0-1,6-7 level CPU
groups: 0 1 6 7
CPU1 attaching sched-domain:
domain 0: span 0-1,6-7 level CPU
groups: 1 6 7 0
CPU6 attaching sched-domain:
domain 0: span 0-1,6-7 level CPU
groups: 6 7 0 1
CPU7 attaching sched-domain:
domain 0: span 0-1,6-7 level CPU
groups: 7 0 1 6
Booting processor 5 APIC 0x5 ip 0x6000
Initializing CPU#5
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU 5/0x5 -> Node 0
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 1
CPU5: Thermal monitoring enabled (TM2)
CPU5: Intel(R) Xeon(R) CPU E5420 @ 2.50GHz stepping 06
checking TSC synchronization [CPU#7 -> CPU#5]: passed.
CPU0 attaching NULL sched-domain.
CPU1 attaching NULL sched-domain.
CPU6 attaching NULL sched-domain.
CPU7 attaching NULL sched-domain.
CPU0 attaching sched-domain:
domain 0: span 0-1,5-7 level CPU
groups: 0 1,5 (cpu_power = 2048) 6 7
CPU1 attaching sched-domain:
domain 0: span 1,5 level MC
groups: 1 5
domain 1: span 0-1,5-7 level CPU
groups: 1,5 (cpu_power = 2048) 6 7 0
CPU5 attaching sched-domain:
domain 0: span 1,5 level MC
groups: 5 1
domain 1: span 0-1,5-7 level CPU
groups: 1,5 (cpu_power = 2048) 6 7 0
CPU6 attaching sched-domain:
domain 0: span 0-1,5-7 level CPU
groups: 6 7 0 1,5 (cpu_power = 2048)
CPU7 attaching sched-domain:
domain 0: span 0-1,5-7 level CPU
groups: 7 0 1,5 (cpu_power = 2048) 6
Booting processor 2 APIC 0x2 ip 0x6000
Initializing CPU#2
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU 2/0x2 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
CPU2: Thermal monitoring enabled (TM2)
CPU2: Intel(R) Xeon(R) CPU E5420 @ 2.50GHz stepping 06
checking TSC synchronization [CPU#7 -> CPU#2]: passed.
CPU0 attaching NULL sched-domain.
CPU1 attaching NULL sched-domain.
CPU5 attaching NULL sched-domain.
CPU6 attaching NULL sched-domain.
CPU7 attaching NULL sched-domain.
CPU0 attaching sched-domain:
domain 0: span 0-2,5-7 level CPU
groups: 0 1,5 (cpu_power = 2048) 2,6 (cpu_power = 2048) 7
CPU1 attaching sched-domain:
domain 0: span 1,5 level MC
groups: 1 5
domain 1: span 0-2,5-7 level CPU
groups: 1,5 (cpu_power = 2048) 2,6 (cpu_power = 2048) 7 0
CPU2 attaching sched-domain:
domain 0: span 2,6 level MC
groups: 2 6
domain 1: span 0-2,5-7 level CPU
groups: 2,6 (cpu_power = 2048) 7 0 1,5 (cpu_power = 2048)
CPU5 attaching sched-domain:
domain 0: span 1,5 level MC
groups: 5 1
domain 1: span 0-2,5-7 level CPU
groups: 1,5 (cpu_power = 2048) 2,6 (cpu_power = 2048) 7 0
CPU6 attaching sched-domain:
domain 0: span 2,6 level MC
groups: 6 2
domain 1: span 0-2,5-7 level CPU
groups: 2,6 (cpu_power = 2048) 7 0 1,5 (cpu_power = 2048)
CPU7 attaching sched-domain:
domain 0: span 0-2,5-7 level CPU
groups: 7 0 1,5 (cpu_power = 2048) 2,6 (cpu_power = 2048)
Booting processor 3 APIC 0x6 ip 0x6000
Initializing CPU#3
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU 3/0x6 -> Node 0
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 2
CPU3: Thermal monitoring enabled (TM2)
CPU3: Intel(R) Xeon(R) CPU E5420 @ 2.50GHz stepping 06
checking TSC synchronization [CPU#1 -> CPU#3]: passed.
CPU0 attaching NULL sched-domain.
CPU1 attaching NULL sched-domain.
CPU2 attaching NULL sched-domain.
CPU5 attaching NULL sched-domain.
CPU6 attaching NULL sched-domain.
CPU7 attaching NULL sched-domain.
CPU0 attaching sched-domain:
domain 0: span 0-3,5-7 level CPU
groups: 0 1,5 (cpu_power = 2048) 2,6 (cpu_power = 2048) 3,7 (cpu_power = 2048)
CPU1 attaching sched-domain:
domain 0: span 1,5 level MC
groups: 1 5
domain 1: span 0-3,5-7 level CPU
groups: 1,5 (cpu_power = 2048) 2,6 (cpu_power = 2048) 3,7 (cpu_power = 2048) 0
CPU2 attaching sched-domain:
domain 0: span 2,6 level MC
groups: 2 6
domain 1: span 0-3,5-7 level CPU
groups: 2,6 (cpu_power = 2048) 3,7 (cpu_power = 2048) 0 1,5 (cpu_power = 2048)
CPU3 attaching sched-domain:
domain 0: span 3,7 level MC
groups: 3 7
domain 1: span 0-3,5-7 level CPU
groups: 3,7 (cpu_power = 2048) 0 1,5 (cpu_power = 2048) 2,6 (cpu_power = 2048)
CPU5 attaching sched-domain:
domain 0: span 1,5 level MC
groups: 5 1
domain 1: span 0-3,5-7 level CPU
groups: 1,5 (cpu_power = 2048) 2,6 (cpu_power = 2048) 3,7 (cpu_power = 2048) 0
CPU6 attaching sched-domain:
domain 0: span 2,6 level MC
groups: 6 2
domain 1: span 0-3,5-7 level CPU
groups: 2,6 (cpu_power = 2048) 3,7 (cpu_power = 2048) 0 1,5 (cpu_power = 2048)
CPU7 attaching sched-domain:
domain 0: span 3,7 level MC
groups: 7 3
domain 1: span 0-3,5-7 level CPU
groups: 3,7 (cpu_power = 2048) 0 1,5 (cpu_power = 2048) 2,6 (cpu_power = 2048)
Booting processor 4 APIC 0x1 ip 0x6000
Initializing CPU#4
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU 4/0x1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU4: Thermal monitoring enabled (TM2)
CPU4: Intel(R) Xeon(R) CPU E5420 @ 2.50GHz stepping 06
checking TSC synchronization [CPU#0 -> CPU#4]: passed.
CPU0 attaching NULL sched-domain.
CPU1 attaching NULL sched-domain.
CPU2 attaching NULL sched-domain.
CPU3 attaching NULL sched-domain.
CPU5 attaching NULL sched-domain.
CPU6 attaching NULL sched-domain.
CPU7 attaching NULL sched-domain.
CPU0 attaching sched-domain:
domain 0: span 0,4 level MC
groups: 0 4
domain 1: span 0-7 level CPU
groups: 0,4 (cpu_power = 2048) 1,5 (cpu_power = 2048) 2,6 (cpu_power = 2048) 3,7 (cpu_power = 2048)
CPU1 attaching sched-domain:
domain 0: span 1,5 level MC
groups: 1 5
domain 1: span 0-7 level CPU
groups: 1,5 (cpu_power = 2048) 2,6 (cpu_power = 2048) 3,7 (cpu_power = 2048) 0,4 (cpu_power = 2048)
CPU2 attaching sched-domain:
domain 0: span 2,6 level MC
groups: 2 6
domain 1: span 0-7 level CPU
groups: 2,6 (cpu_power = 2048) 3,7 (cpu_power = 2048) 0,4 (cpu_power = 2048) 1,5 (cpu_power = 2048)
CPU3 attaching sched-domain:
domain 0: span 3,7 level MC
groups: 3 7
domain 1: span 0-7 level CPU
groups: 3,7 (cpu_power = 2048) 0,4 (cpu_power = 2048) 1,5 (cpu_power = 2048) 2,6 (cpu_power = 2048)
CPU4 attaching sched-domain:
domain 0: span 0,4 level MC
groups: 4 0
domain 1: span 0-7 level CPU
groups: 0,4 (cpu_power = 2048) 1,5 (cpu_power = 2048) 2,6 (cpu_power = 2048) 3,7 (cpu_power = 2048)
CPU5 attaching sched-domain:
domain 0: span 1,5 level MC
groups: 5 1
domain 1: span 0-7 level CPU
groups: 1,5 (cpu_power = 2048) 2,6 (cpu_power = 2048) 3,7 (cpu_power = 2048) 0,4 (cpu_power = 2048)
CPU6 attaching sched-domain:
domain 0: span 2,6 level MC
groups: 6 2
domain 1: span 0-7 level CPU
groups: 2,6 (cpu_power = 2048) 3,7 (cpu_power = 2048) 0,4 (cpu_power = 2048) 1,5 (cpu_power = 2048)
CPU7 attaching sched-domain:
domain 0: span 3,7 level MC
groups: 7 3
domain 1: span 0-7 level CPU
groups: 3,7 (cpu_power = 2048) 0,4 (cpu_power = 2048) 1,5 (cpu_power = 2048) 2,6 (cpu_power = 2048)
CPU0 attaching NULL sched-domain.
CPU1 attaching NULL sched-domain.
CPU2 attaching NULL sched-domain.
CPU3 attaching NULL sched-domain.
CPU4 attaching NULL sched-domain.
CPU5 attaching NULL sched-domain.
CPU6 attaching NULL sched-domain.
CPU7 attaching NULL sched-domain.
CPU0 attaching sched-domain:
domain 0: span 0,4 level MC
groups: 0 4
domain 1: span 0-6 level CPU
groups: 0,4 (cpu_power = 2048) 1,5 (cpu_power = 2048) 2,6 (cpu_power = 2048) 3
CPU1 attaching sched-domain:
domain 0: span 1,5 level MC
groups: 1 5
domain 1: span 0-6 level CPU
groups: 1,5 (cpu_power = 2048) 2,6 (cpu_power = 2048) 3 0,4 (cpu_power = 2048)
CPU2 attaching sched-domain:
domain 0: span 2,6 level MC
groups: 2 6
domain 1: span 0-6 level CPU
groups: 2,6 (cpu_power = 2048) 3 0,4 (cpu_power = 2048) 1,5 (cpu_power = 2048)
CPU3 attaching sched-domain:
domain 0: span 0-6 level CPU
groups: 3 0,4 (cpu_power = 2048) 1,5 (cpu_power = 2048) 2,6 (cpu_power = 2048)
CPU4 attaching sched-domain:
domain 0: span 0,4 level MC
groups: 4 0
domain 1: span 0-6 level CPU
groups: 0,4 (cpu_power = 2048) 1,5 (cpu_power = 2048) 2,6 (cpu_power = 2048) 3
CPU5 attaching sched-domain:
domain 0: span 1,5 level MC
groups: 5 1
domain 1: span 0-6 level CPU
groups: 1,5 (cpu_power = 2048) 2,6 (cpu_power = 2048) 3 0,4 (cpu_power = 2048)
CPU6 attaching sched-domain:
domain 0: span 2,6 level MC
groups: 6 2
domain 1: span 0-6 level CPU
groups: 2,6 (cpu_power = 2048) 3 0,4 (cpu_power = 2048) 1,5 (cpu_power = 2048)
CPU 7 is now offline
CPU0 attaching NULL sched-domain.
CPU1 attaching NULL sched-domain.
CPU2 attaching NULL sched-domain.
CPU3 attaching NULL sched-domain.
CPU4 attaching NULL sched-domain.
CPU5 attaching NULL sched-domain.
CPU6 attaching NULL sched-domain.
CPU0 attaching sched-domain:
domain 0: span 0,4 level MC
groups: 0 4
domain 1: span 0-5 level CPU
groups: 0,4 (cpu_power = 2048) 1,5 (cpu_power = 2048) 2 3
CPU1 attaching sched-domain:
domain 0: span 1,5 level MC
groups: 1 5
domain 1: span 0-5 level CPU
groups: 1,5 (cpu_power = 2048) 2 3 0,4 (cpu_power = 2048)
CPU2 attaching sched-domain:
domain 0: span 0-5 level CPU
groups: 2 3 0,4 (cpu_power = 2048) 1,5 (cpu_power = 2048)
CPU3 attaching sched-domain:
domain 0: span 0-5 level CPU
groups: 3 0,4 (cpu_power = 2048) 1,5 (cpu_power = 2048) 2
CPU4 attaching sched-domain:
domain 0: span 0,4 level MC
groups: 4 0
domain 1: span 0-5 level CPU
groups: 0,4 (cpu_power = 2048) 1,5 (cpu_power = 2048) 2 3
CPU5 attaching sched-domain:
domain 0: span 1,5 level MC
groups: 5 1
domain 1: span 0-5 level CPU
groups: 1,5 (cpu_power = 2048) 2 3 0,4 (cpu_power = 2048)
CPU 6 is now offline
CPU0 attaching NULL sched-domain.
CPU1 attaching NULL sched-domain.
CPU2 attaching NULL sched-domain.
CPU3 attaching NULL sched-domain.
CPU4 attaching NULL sched-domain.
CPU5 attaching NULL sched-domain.
CPU0 attaching sched-domain:
domain 0: span 0,4 level MC
groups: 0 4
domain 1: span 0-4 level CPU
groups: 0,4 (cpu_power = 2048) 1 2 3
CPU1 attaching sched-domain:
domain 0: span 0-4 level CPU
groups: 1 2 3 0,4 (cpu_power = 2048)
CPU2 attaching sched-domain:
domain 0: span 0-4 level CPU
groups: 2 3 0,4 (cpu_power = 2048) 1
CPU3 attaching sched-domain:
domain 0: span 0-4 level CPU
groups: 3 0,4 (cpu_power = 2048) 1 2
CPU4 attaching sched-domain:
domain 0: span 0,4 level MC
groups: 4 0
domain 1: span 0-4 level CPU
groups: 0,4 (cpu_power = 2048) 1 2 3
CPU 5 is now offline
CPU0 attaching NULL sched-domain.
CPU1 attaching NULL sched-domain.
CPU2 attaching NULL sched-domain.
CPU3 attaching NULL sched-domain.
CPU4 attaching NULL sched-domain.
CPU0 attaching sched-domain:
domain 0: span 0-3 level CPU
groups: 0 1 2 3
CPU1 attaching sched-domain:
domain 0: span 0-3 level CPU
groups: 1 2 3 0
CPU2 attaching sched-domain:
domain 0: span 0-3 level CPU
groups: 2 3 0 1
CPU3 attaching sched-domain:
domain 0: span 0-3 level CPU
groups: 3 0 1 2
CPU 4 is now offline